Name | Last modified | Size | Description | |
---|---|---|---|---|
Parent Directory | - | |||
1b cut if one piece.JPG | 2005-08-24 13:02 | 1.3M | ||
1c finish cut.JPG | 2005-08-24 13:03 | 1.3M | ||
1 remove fenders.JPG | 2005-08-24 13:07 | 1.3M | ||
2b loosen wires.JPG | 2005-08-24 13:05 | 1.3M | ||
2 loosen wires.JPG | 2005-08-24 13:04 | 1.4M | ||
3b remove doorstop.JPG | 2005-08-24 13:08 | 1.4M | ||
3 remove doorstop.JPG | 2005-08-24 13:00 | 1.3M | ||
4b remove hinge.JPG | 2005-08-24 13:11 | 1.3M | ||
4 remove hinge.JPG | 2005-08-24 13:10 | 1.3M | ||
5b test fit.JPG | 2005-08-24 13:25 | 1.3M | ||
5 test fit.JPG | 2005-08-24 13:12 | 1.4M | ||
6b sit flush.JPG | 2005-08-24 13:24 | 1.3M | ||
6 clear extra metal.JPG | 2005-08-24 13:22 | 1.4M | ||
6c sit flush.JPG | 2005-08-24 13:21 | 1.4M | ||
6d cut perimeter.JPG | 2005-08-24 13:26 | 1.3M | ||
6e cut perimeter.JPG | 2005-08-24 13:27 | 1.4M | ||
6f hole cut.JPG | 2005-08-24 13:29 | 1.3M | ||
6 flatten doorstop h..> | 2005-08-24 13:23 | 1.3M | ||
6g fit below surface..> | 2005-08-24 13:30 | 1.4M | ||
7b cut slot.JPG | 2005-08-24 13:45 | 1.4M | ||
7c slot cut.JPG | 2005-08-24 13:46 | 1.4M | ||
7d slot alignment.JPG | 2005-08-24 13:47 | 1.4M | ||
7e install arch.JPG | 2005-08-24 13:48 | 1.4M | ||
7f arch installed.JPG | 2005-08-24 13:49 | 1.4M | ||
7 observe depth.JPG | 2005-08-24 13:52 | 392K | ||
8 cover.JPG | 2005-08-24 13:50 | 1.4M | ||
9b tack weld.JPG | 2005-08-24 14:08 | 1.2M | ||
9c tack weld.JPG | 2005-08-24 13:58 | 1.4M | ||
9d weld doorplate.JPG | 2005-08-24 13:59 | 1.3M | ||
9e remove hinge.JPG | 2005-08-24 14:00 | 392K | ||
9f test motion.JPG | 2005-08-24 14:10 | 1.4M | ||
9g test motion.JPG | 2005-08-24 13:57 | 1.3M | ||
9 tack weld.JPG | 2005-08-24 13:51 | 1.4M | ||
10b cut.JPG | 2005-08-24 12:53 | 858K | ||
10 cut.JPG | 2005-08-24 12:52 | 1.3M | ||
11b welded.JPG | 2005-08-24 14:27 | 1.4M | ||
11c weld doorplate.JPG | 2005-08-24 14:28 | 1.0M | ||
12b undercoat.JPG | 2005-08-24 14:43 | 1.3M | ||
12c undercoat.JPG | 2005-08-24 14:40 | 1.3M | ||
12 grind and scuff.JPG | 2005-08-24 14:26 | 1.4M | ||
13 replace door.JPG | 2005-08-24 14:41 | 1.4M | ||
14 zip ties.JPG | 2005-08-24 14:42 | 1.2M | ||
15b install balljoin..> | 2005-08-24 14:44 | 1.4M | ||
15 clear metal.JPG | 2005-08-24 14:39 | 1.3M | ||
15c place bottom.JPG | 2005-08-24 14:45 | 1.4M | ||
15d mark bottom.JPG | 2005-08-24 14:47 | 1.4M | ||
15e mark top.JPG | 2005-08-24 14:48 | 1.1M | ||
16b drill plate.JPG | 2005-08-24 15:16 | 1.3M | ||
16c weld plate.JPG | 2005-08-24 15:17 | 1.3M | ||
16d drill larger.JPG | 2005-08-24 15:18 | 1.3M | ||
16e mask.JPG | 2005-08-24 15:19 | 1.3M | ||
16f weld balljoints.JPG | 2005-08-24 15:15 | 1.4M | ||
16 plate.JPG | 2005-08-24 15:20 | 1.2M | ||
17.JPG | 2005-08-24 15:21 | 118K | ||
18.JPG | 2005-08-24 15:25 | 1.4M | ||
18b horizontal.JPG | 2005-08-24 15:26 | 1.3M | ||
18c safety.JPG | 2005-08-24 15:26 | 128K | ||
18d safety.JPG | 2005-08-24 15:37 | 1.3M | ||
18e top adjust.JPG | 2005-08-24 15:34 | 1.4M | ||
19b peel back vinyl.JPG | 2005-08-24 15:36 | 1.3M | ||
19c cut and glue.JPG | 2005-08-24 15:57 | 1.3M | ||
19d wrap edge.JPG | 2005-08-24 15:53 | 1.4M | ||
19e panel finished.JPG | 2005-08-24 15:54 | 1.3M | ||
19 mark panel.JPG | 2005-08-24 15:35 | 1.3M | ||
20 install all parts..> | 2005-08-24 15:56 | 1.4M | ||
GTF DIABLO Install I..> | 2005-08-24 16:41 | 185K | ||
GTF DIABLO Install p..> | 2005-08-24 16:52 | 13M | ||
MR201.JPG | 2005-08-24 16:14 | 380K | ||
MR202.JPG | 2005-08-24 16:13 | 365K | ||
MR203.JPG | 2005-08-24 16:13 | 332K | ||
MR204.JPG | 2005-08-24 16:13 | 406K | ||
MR205.JPG | 2005-08-24 16:14 | 298K | ||
MR206.JPG | 2005-08-24 16:14 | 304K | ||
MR207.JPG | 2005-08-24 16:14 | 336K | ||
MR209.JPG | 2005-08-24 16:39 | 338K | ||
MR210.JPG | 2005-08-24 16:40 | 357K | ||
MR211.JPG | 2005-08-24 16:41 | 351K | ||
MR212.JPG | 2005-08-24 16:41 | 475K | ||